dmesg - AMD Phenom II N930

Return To AMD Phenom II N930 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.0-rc6-3-desktop (geeko@buildhost) (gcc version 4.8.3 20140627 [gcc-4_8-branch revision 212064] (SUSE Linux) ) #1 SMP PREEMPT Tue Jun 2 13:59:50 UTC 2015 (8f2a4d1)
tseg: 00cff00000
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ce448fff] usable
BIOS-e820: [mem 0x00000000ce449000-0x00000000ce648fff] ACPI NVS
BIOS-e820: [mem 0x00000000ce649000-0x00000000cfd3efff] usable
BIOS-e820: [mem 0x00000000cfd3f000-0x00000000cfdbefff] reserved
BIOS-e820: [mem 0x00000000cfdbf000-0x00000000cfebefff] ACPI NVS
BIOS-e820: [mem 0x00000000cfebf000-0x00000000cfef5fff] ACPI data
BIOS-e820: [mem 0x00000000cfef6000-0x00000000cfefffff] usable
BIOS-e820: [mem 0x00000000f7000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000019fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Hewlett-Packard Presario CQ62 Notebook PC/1445, BIOS F.27 02/16/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x1a0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000FFE00000 mask FFFFFFE00000 write-protect
  4 base 000100000000 mask FFFF80000000 write-back
  5 base 000180000000 mask FFFFE0000000 write-back
  6 disabled
  7 disabled
TOM2: 00000001b0000000 aka 6912M
PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
e820: last_pfn = 0xcff00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x02225000, 0x02225fff] PGTABLE
BRK [0x02226000, 0x02226fff] PGTABLE
BRK [0x02227000, 0x02227fff] PGTABLE
init_memory_mapping: [mem 0x19fe00000-0x19fffffff]
 [mem 0x19fe00000-0x19fffffff] page 2M
BRK [0x02228000, 0x02228fff] PGTABLE
init_memory_mapping: [mem 0x180000000-0x19fdfffff]
 [mem 0x180000000-0x19fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0xce448fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0xbfffffff] page 1G
 [mem 0xc0000000-0xce3fffff] page 2M
 [mem 0xce400000-0xce448fff] page 4k
init_memory_mapping: [mem 0xce649000-0xcfd3efff]
 [mem 0xce649000-0xce7fffff] page 4k
 [mem 0xce800000-0xcfbfffff] page 2M
 [mem 0xcfc00000-0xcfd3efff] page 4k
BRK [0x02229000, 0x02229fff] PGTABLE
BRK [0x0222a000, 0x0222afff] PGTABLE
init_memory_mapping: [mem 0xcfef6000-0xcfefffff]
 [mem 0xcfef6000-0xcfefffff] page 4k
init_memory_mapping: [mem 0x100000000-0x17fffffff]
 [mem 0x100000000-0x17fffffff] page 1G
RAMDISK: [mem 0x36dd0000-0x376dffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 HP    )
ACPI: XSDT 0x00000000CFEF5120 00005C (v01 HPQOEM SLIC-MPC 00000003      01000013)
ACPI: FACP 0x00000000CFEF4000 0000F4 (v04 HP     1445     00000003 MSFT 01000013)
ACPI: DSDT 0x00000000CFEE2000 00E1CE (v01 HP     1445     F0000000 MSFT 01000013)
ACPI: FACS 0x00000000CFE9B000 000040
ACPI: HPET 0x00000000CFEF3000 000038 (v01 HP     1445     00000001 MSFT 01000013)
ACPI: APIC 0x00000000CFEF2000 000084 (v02 HP     1445     00000001 MSFT 01000013)
ACPI: MCFG 0x00000000CFEF1000 00003C (v01 HP     1445     00000001 MSFT 01000013)
ACPI: BOOT 0x00000000CFEE1000 000028 (v01 HP     1445     00000001 MSFT 01000013)
ACPI: SLIC 0x00000000CFEE0000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 0x00000000CFEDF000 000A30 (v01 AMD    POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000019fffffff]
NODE_DATA(0) allocated [mem 0x19ffe9000-0x19fffcfff]
 [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880199a00000-ffff88019f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000019fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000ce448fff]
  node   0: [mem 0x00000000ce649000-0x00000000cfd3efff]
  node   0: [mem 0x00000000cfef6000-0x00000000cfefffff]
  node   0: [mem 0x0000000100000000-0x000000019fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000019fffffff]
On node 0 totalpages: 1506023
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 13230 pages used for memmap
  DMA32 zone: 846665 pages, LIFO batch:31
  Normal zone: 10240 pages used for memmap
  Normal zone: 655360 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x1002a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xce449000-0xce648fff]
PM: Registered nosave memory: [mem 0xcfd3f000-0xcfdbefff]
PM: Registered nosave memory: [mem 0xcfdbf000-0xcfebefff]
PM: Registered nosave memory: [mem 0xcfebf000-0xcfef5fff]
PM: Registered nosave memory: [mem 0xcff00000-0xf6ffffff]
PM: Registered nosave memory: [mem 0xf7000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xcff00000-0xf6ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88019fc00000 s96856 r8192 d30120 u524288
pcpu-alloc: s96856 r8192 d30120 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1482468
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x817c000000-0x817dffffff] (32MB)
Aperture beyond 4GB. Ignoring.
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 5769456K/6024092K available (6810K kernel code, 1120K rwdata, 5000K rodata, 1564K init, 1520K bss, 254636K reserved, 0K cma-reserved)
Preemptible hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
	RCU kthread priority: 1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:456 16
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1995.072 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.14 BogoMIPS (lpj=1995072)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff820a1000 - ffffffff820a7000)
ftrace: allocating 25803 entries in 101 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II N930 Quad-Core Processor (fam: 10, model: 05, stepping: 03)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU0
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
process: Switch to broadcast mode on CPU1
 #2
process: Switch to broadcast mode on CPU2
 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (15960.57 BogoMIPS)
process: Switch to broadcast mode on CPU3
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xce449000-0xce648fff] (2097152 bytes)
PM: Registering ACPI NVS region [mem 0xcfdbf000-0xcfebefff] (1048576 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 11:00:40, date: 06/09/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [0, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xf7000000-0xf7ffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [e0000000, f11fffff]
node 0 link 0: mmio [f1200000, f13fffff]
node 0 link 0: mmio [f1400000, f6ffffff]
node 0 link 0: mmio [f7000000, f7ffffff] ==> none
node 0 link 0: mmio [f8000000, ffdfffff]
TOM2: 00000001b0000000 aka 6912M
bus: [bus 00-1f] on node 0 link 0
bus: 00 [io  0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xf6ffffff]
bus: 00 [mem 0xf8000000-0xffffffff]
bus: 00 [mem 0x1b0000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf7000000-0xf7ffffff] (base 0xf7000000)
PCI: MMCONFIG at [mem 0xf7000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf6ffffff window]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
pci 0000:00:03.0: [1022:960b] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0x8038-0x803f]
pci 0000:00:11.0: reg 0x14: [io  0x804c-0x804f]
pci 0000:00:11.0: reg 0x18: [io  0x8030-0x8037]
pci 0000:00:11.0: reg 0x1c: [io  0x8048-0x804b]
pci 0000:00:11.0: reg 0x20: [io  0x8010-0x801f]
pci 0000:00:11.0: reg 0x24: [mem 0xf1408000-0xf14083ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xf1407000-0xf1407fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xf1408600-0xf14086ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xf1406000-0xf1406fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xf1408500-0xf14085ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf1400000-0xf1403fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xf1405000-0xf1405fff]
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xf1404000-0xf1404fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xf1408400-0xf14084ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:05.0: reg 0x14: [io  0x7000-0x70ff]
pci 0000:01:05.0: reg 0x18: [mem 0xf1300000-0xf130ffff]
pci 0000:01:05.0: reg 0x24: [mem 0xf1200000-0xf12fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
pci 0000:01:05.1: reg 0x10: [mem 0xf1310000-0xf1313fff]
pci 0000:01:05.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
pci 0000:00:01.0:   bridge window [mem 0xf1200000-0xf13fffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1002:68e0] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xf0200000-0xf021ffff 64bit]
pci 0000:02:00.0: reg 0x20: [io  0x3000-0x30ff]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 02-03]
pci 0000:00:03.0:   bridge window [io  0x3000-0x6fff]
pci 0000:00:03.0:   bridge window [mem 0xf0200000-0xf11fffff]
pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:04:00.0: [1814:3090] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xf0100000-0xf010ffff]
pci 0000:00:05.0: PCI bridge to [bus 04]
pci 0000:00:05.0:   bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io  0x2000-0x20ff]
pci 0000:05:00.0: reg 0x18: [mem 0xf0010000-0xf0010fff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xf0000000-0xf000ffff 64bit pref]
pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 05]
pci 0000:00:06.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:06.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xf6ffffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xf8000000-0xfed3ffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI : EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:05.0
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xce449000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcfd3f000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcff00000-0xcfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xf7000000-0xf7ffffff] has been reserved
system 00:00: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:00: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN1e28 SYN1e00 SYN0002 PNP0f13 (active)
system 00:04: [io  0x0400-0x04cf] could not be reserved
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: [io  0x04d6] has been reserved
system 00:04: [io  0x0550] has been reserved
system 00:04: [io  0x0680-0x06ff] has been reserved
system 00:04: [io  0x077a] has been reserved
system 00:04: [io  0x0c00-0x0c01] has been reserved
system 00:04: [io  0x0c14] has been reserved
system 00:04: [io  0x0c50-0x0c52] has been reserved
system 00:04: [io  0x0c6c] has been reserved
system 00:04: [io  0x0c6f] has been reserved
system 00:04: [io  0x0cd0-0x0cdb] has been reserved
system 00:04: [io  0x0380-0x0387] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xffe00000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:05:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:06.0: BAR 14: assigned [mem 0xf1500000-0xf15fffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
pci 0000:00:01.0:   bridge window [mem 0xf1200000-0xf13fffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xf0220000-0xf023ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02-03]
pci 0000:00:03.0:   bridge window [io  0x3000-0x6fff]
pci 0000:00:03.0:   bridge window [mem 0xf0200000-0xf11fffff]
pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 04]
pci 0000:00:05.0:   bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:05:00.0: BAR 6: assigned [mem 0xf1500000-0xf150ffff pref]
pci 0000:00:06.0: PCI bridge to [bus 05]
pci 0000:00:06.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:06.0:   bridge window [mem 0xf1500000-0xf15fffff]
pci 0000:00:06.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 06]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf6ffffff window]
pci_bus 0000:00: resource 19 [mem 0xf8000000-0xfed3ffff window]
pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xf1200000-0xf13fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x3000-0x6fff]
pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf11fffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xf1500000-0xf15fffff]
pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:06: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:06: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:06: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:06: resource 10 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:06: resource 11 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:06: resource 12 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:06: resource 13 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:06: resource 14 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:06: resource 15 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:06: resource 16 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:06: resource 17 [mem 0x000ec000-0x000effff window]
pci_bus 0000:06: resource 18 [mem 0xd0000000-0xf6ffffff window]
pci_bus 0000:06: resource 19 [mem 0xf8000000-0xfed3ffff window]
pci_bus 0000:06: resource 20 [mem 0xfed45000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 9280K (ffff880036dd0000 - ffff8800376e0000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0: patch_level=0x010000c8
microcode: CPU1: patch_level=0x010000c8
microcode: CPU2: patch_level=0x010000c8
microcode: CPU3: patch_level=0x010000c8
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1433847646.653:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xf1408000 port 0xf1408100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xf1408000 port 0xf1408180 irq 19
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf1408600
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.0-rc6-3-desktop ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xf1408500
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: hp      DVD A  DS8A4LH, DH68, max UDMA/100
ata1.00: ATA-8: WDC WD3200BEVT-60A23T0, 01.01A01, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-6 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM            hp       DVD A  DS8A4LH   DH68 PQ: 0 ANSI: 5
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 1995.004 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x39837d8a1a2, max_idle_ns: 881590777778 ns
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.1.0-rc6-3-desktop ehci_hcd
usb 1-3: new high-speed USB device number 2 using ehci-pci
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
usb 1-3: New USB device found, idVendor=064e, idProduct=f203
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: HP Webcam-101
usb 1-3: Manufacturer: SuYin
usb 1-3: SerialNumber: HF0317-J311-SE011-VH-R04.02.01
hub 2-0:1.0: 5 ports detected
Switched to clocksource tsc
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xf1408400
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.1.0-rc6-3-desktop ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
NET: Registered protocol family 10
registered taskstats version 1
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
  Magic number: 3:801:23
rtc_cmos 00:01: setting system clock to 2015-06-09 11:00:49 UTC (1433847649)
PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD3200BEVT-60A23T0_WD-WX11A70E6116-part5
psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4844]
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0xa0400, board id: 0, fw id: 639099
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1564K (ffffffff81f1a000 - ffffffff820a1000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1372K (ffff8800016a9000 - ffff880001800000)
Freeing unused kernel memory: 1144K (ffff880001ce2000 - ffff880001e00000)
systemd[1]: RTC configured in localtime, applying delta of 330 minutes to system time.
random: systemd urandom read with 39 bits of entropy available
systemd[1]: systemd 210 running in system mode. (+PAM -LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP +APPARMOR)
systemd[1]: Detected architecture 'x86-64'.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Starting Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting -.slice.
systemd[1]: Created slice -.slice.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Sockets.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Journal Service...
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
systemd[1]: Starting Slices.
systemd-journald[195]: Failed to set file attributes: Inappropriate ioctl for device
systemd[1]: Reached target Slices.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Local File Systems.
systemd[1]: Started Journal Service.
[drm] Initialized drm 1.1.0 20060810
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xf1407000
sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
[drm] radeon kernel modesetting enabled.
VGA switcheroo: detected switching method \_SB_.PCI0.AGP_.VGA_.ATPX handle
checking generic (d0000000 410000) vs hw (d0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.1.0-rc6-3-desktop ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xf1406000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.1.0-rc6-3-desktop ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xf1405000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.1.0-rc6-3-desktop ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 18, io mem 0xf1404000
random: nonblocking pool is initialized
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.1.0-rc6-3-desktop ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
usb 7-1: new full-speed USB device number 2 using ohci-pci
raid6: sse2x1   gen()  7644 MB/s
raid6: sse2x1   xor()  7130 MB/s
raid6: sse2x2   gen() 12324 MB/s
raid6: sse2x2   xor() 11791 MB/s
raid6: sse2x4   gen() 13214 MB/s
raid6: sse2x4   xor()  7412 MB/s
raid6: using algorithm sse2x4 gen() 13214 MB/s
raid6: .... xor() 7412 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
xor: measuring software checksum speed
usb 7-1: New USB device found, idVendor=148f, idProduct=1000
usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
   prefetch64-sse: 323920.000 MB/sec
   generic_sse: 285084.000 MB/sec
xor: using function: prefetch64-sse (323920.000 MB/sec)
Btrfs loaded, assert=on
BTRFS: device fsid 2f121089-0bc9-4e0b-b335-023f6ca62090 devid 1 transid 45909 /dev/sda6
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1445).
[drm] register mmio base: 0xF1300000
[drm] register mmio size: 65536
ATOM BIOS: HP_JoYaHeWi
radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone  kernel: Available graphics memory: 2924396 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading RS780 Microcode
[drm] radeon: power management initialized
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x00000000C0258000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff88019694dc00
radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038 and cpu addr 0xffffc90001c16038
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA-1
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm]   LVDS-1
[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm]   Encoders:
[drm]     LCD1: INTERNAL_KLDSCP_LVTMA
[drm] Connector 2:
[drm]   HDMI-A-1
[drm]   HPD1
[drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm] fb mappable at 0xD0359000
[drm] vram apper at 0xD0000000
[drm] size 4325376
[drm] fb depth is 24
[drm]    pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:05.0: registered panic notifier
[drm] Initialized radeon 2.42.0 20080528 for 0000:01:05.0 on minor 0
radeon 0000:02:00.0: enabling device (0100 -> 0103)
[drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x103C:0x1445).
[drm] register mmio base: 0xF0200000
[drm] register mmio size: 131072
vga_switcheroo: enabled
ATPX version 1, functions 0x000001a2
ATOM BIOS: HP
radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:02:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading CEDAR Microcode
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x000000000025E000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801966adc00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801966adc0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000341c418
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:02:00.0: radeon: MSI limited to 32-bit
radeon 0000:02:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DP-1
[drm]   HPD1
[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm]   DP-2
[drm]   HPD2
[drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm]   VGA-2
[drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
radeon 0000:02:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0xE035F000
[drm] vram apper at 0xE0000000
[drm] size 3145728
[drm] fb depth is 24
[drm]    pitch is 4096
radeon 0000:02:00.0: fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.42.0 20080528 for 0000:02:00.0 on minor 1
PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
PM: Marking nosave pages: [mem 0xce449000-0xce648fff]
PM: Marking nosave pages: [mem 0xcfd3f000-0xcfef5fff]
PM: Marking nosave pages: [mem 0xcff00000-0xffffffff]
PM: Marking nosave pages: [mem 0xc4000000-0xc7ffffff]
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
BTRFS info (device sda6): disk space caching is enabled
systemd-journald[195]: Received SIGTERM from PID 1 (systemd).
systemd[1]: RTC configured in localtime, applying delta of 330 minutes to system time.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
BTRFS info (device sda6): disk space caching is enabled
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
ACPI: AC Adapter [ACAD] (on-line)
ACPI: processor limited to max C-state 1
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
acpi device:03: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input3
ACPI: Video Device [VGA2] (multi-head: yes  rom: no  post: no)
acpi device:0e: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/LNXVIDEO:02/input/input4
ACPI: Battery Slot [BAT0] (battery present)
[Firmware Bug]: Invalid critical threshold (0)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (68 C)
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
wmi: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input8
MCE: In-kernel MCE decoding enabled.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
acpi-cpufreq: overriding BIOS provided _PSD data
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB_.PCI0.SMBS.SMBI) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150410/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff8801994b8130), AE_AML_BUFFER_LIMIT (20150410/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8801994b8ec8), AE_AML_BUFFER_LIMIT (20150410/psparse-536)
ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150410/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff8801994b8130), AE_AML_BUFFER_LIMIT (20150410/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8801994b8ec8), AE_AML_BUFFER_LIMIT (20150410/psparse-536)
ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150410/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff8801994b8130), AE_AML_BUFFER_LIMIT (20150410/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8801994b8ec8), AE_AML_BUFFER_LIMIT (20150410/psparse-536)
input: HP WMI hotkeys as /devices/virtual/input/input9
ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150410/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff8801994b8130), AE_AML_BUFFER_LIMIT (20150410/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8801994b8ec8), AE_AML_BUFFER_LIMIT (20150410/psparse-536)
Bluetooth: hci0 hardware error 0x37
ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150410/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff8801994b8130), AE_AML_BUFFER_LIMIT (20150410/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8801994b8ec8), AE_AML_BUFFER_LIMIT (20150410/psparse-536)
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x41
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90000e82b00). heartbeat=60 sec (nowayout=0)
Linux video capture interface: v2.00
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.0 eth0: RTL8102e at 0xffffc90000e7a000, 60:eb:69:1e:29:fb, XID 04e00000 IRQ 28
r8169 0000:05:00.0 enp5s0: renamed from eth0
uvcvideo: Found UVC 1.00 device HP Webcam-101 (064e:f203)
input: HP Webcam-101 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: Calling CRDA to update world regulatory domain
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input11
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC270: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
cfg80211: Calling CRDA to update world regulatory domain
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
rt2800pci 0000:04:00.0 wlo2: renamed from wlan0
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Adding 2108412k swap on /dev/sda5.  Priority:-1 extents:1 across:2108412k FS
systemd-journald[404]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1433827902.349:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=742 comm="apparmor_parser"
audit: type=1400 audit(1433827902.449:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=750 comm="apparmor_parser"
audit: type=1400 audit(1433827902.472:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=754 comm="apparmor_parser"
audit: type=1400 audit(1433827902.493:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=758 comm="apparmor_parser"
audit: type=1400 audit(1433827902.517:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/lessopen.sh" pid=763 comm="apparmor_parser"
audit: type=1400 audit(1433827902.543:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=767 comm="apparmor_parser"
audit: type=1400 audit(1433827902.551:8): apparmor="STATUS" operation="profile_load" name="DEFAULT_URI" pid=767 comm="apparmor_parser"
audit: type=1400 audit(1433827902.555:9): apparmor="STATUS" operation="profile_load" name="HANDLING_UNTRUSTED_INPUT" pid=767 comm="apparmor_parser"
audit: type=1400 audit(1433827902.559:10): apparmor="STATUS" operation="profile_load" name="phpsysinfo" pid=767 comm="apparmor_parser"
audit: type=1400 audit(1433827902.580:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/anvil" pid=771 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
r8169 0000:05:00.0 enp5s0: link down
r8169 0000:05:00.0 enp5s0: link down
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
r8169 0000:05:00.0 enp5s0: link up
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34
NET: Registered protocol family 17
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x000000000025E000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801966adc00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801966adc0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000341c418
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: device changed decodes: PCI:0000:01:05.0,olddecodes=io+mem,decodes=none:owns=io+mem
Ebtables v2.0 registered
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
device virbr1-nic entered promiscuous mode
virbr1: port 1(virbr1-nic) entered forwarding state
virbr1: port 1(virbr1-nic) entered forwarding state
audit_printk_skb: 105 callbacks suppressed
audit: type=1400 audit(1433827934.965:47): apparmor="DENIED" operation="open" profile="/usr/sbin/dnsmasq" name="/dev/tty" pid=1814 comm="sh" requested_mask="rw" denied_mask="rw" fsuid=0 ouid=0
SFW2-INext-DROP-DEFLT IN=virbr1-nic OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=442 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=402 
SFW2-INext-DROP-DEFLT IN=virbr1-nic OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=267 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=227 
SFW2-INext-DROP-DEFLT IN=virbr1-nic OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=442 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=402 
virbr1: port 1(virbr1-nic) entered disabled state
device virbr2-nic entered promiscuous mode
virbr2: port 1(virbr2-nic) entered listening state
virbr2: port 1(virbr2-nic) entered listening state
SFW2-INext-DROP-DEFLT IN=virbr1 OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=442 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=402 
SFW2-INext-DROP-DEFLT IN=virbr1 OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=267 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=227 
virbr2: port 1(virbr2-nic) entered learning state
virbr2: port 1(virbr2-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered learning state
virbr0: topology change detected, propagating
virbr0: port 1(virbr0-nic) entered forwarding state
audit: type=1400 audit(1433827945.199:48): apparmor="DENIED" operation="open" profile="/usr/sbin/dnsmasq" name="/dev/tty" pid=2007 comm="sh" requested_mask="rw" denied_mask="rw" fsuid=0 ouid=0
virbr0: port 1(virbr0-nic) entered disabled state
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x000000000025E000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801966adc00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801966adc0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000341c418
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
SFW2-INext-DROP-DEFLT IN=virbr1 OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:62eb:69ff:fe1e:29fb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=virbr1 OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x000000000025E000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801966adc00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801966adc0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000341c418
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
SFW2-INext-DROP-DEFLT IN=virbr1 OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=virbr1 OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:62eb:69ff:fe1e:29fb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
fuse init (API version 7.23)
SFW2-INext-DROP-DEFLT IN=virbr1 OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:62eb:69ff:fe1e:29fb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=virbr1 OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:62eb:69ff:fe1e:29fb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=virbr1 OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:62eb:69ff:fe1e:29fb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x000000000025E000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801966adc00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801966adc0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000341c418
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x000000000025E000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801966adc00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801966adc0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000341c418
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
SFW2-INext-DROP-DEFLT IN=virbr1 OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:62eb:69ff:fe1e:29fb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=virbr1 OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:62eb:69ff:fe1e:29fb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=virbr1 OUT= MAC= SRC=fe80:0000:0000:0000:5054:00ff:fe88:1b9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:62eb:69ff:fe1e:29fb DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44 
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=0489, idProduct=c001
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Qualcomm HSUSB Device
usb 2-1: Manufacturer: Qualcomm Incorporated
usb 2-1: SerialNumber: FADM5149301393
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 2:0:0:0: Direct-Access     GOOGLE   Mass storage     0100 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 2:0:0:1: CD-ROM            Android  SCSI CD-ROM V001      PQ: 0 ANSI: 2
sr 2:0:0:1: [sr1] scsi-1 drive
sr 2:0:0:1: Attached scsi CD-ROM sr1
sr 2:0:0:1: Attached scsi generic sg3 type 5
sd 2:0:0:0: [sdb] Attached SCSI removable disk
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x000000000025E000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801966adc00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801966adc0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000341c418
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x000000000025E000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801966adc00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801966adc0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000341c418
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded

Return To AMD Phenom II N930 System Information